2PCS Grinding Sheets Milling Sheets for 3000W 110V Electric Grain Mill Heavy Duty Commercial Grain Grinder Machine Feed Grain Mills Grain Dry Feed Flour Mills Cereals Grinder Rice Corn Grain Wheat

How to Install1. Open the front cover of the machine, remove the grinding discs, and then loosen the screws that fix the grinding discs and take them out.2. Reinstall the new grinding discs back to the original grinding discs position and lock the screws, but do not lock them first. First, observe the gap between the inner circle of the grinding discs and the mounting step, and adjust the gap to ensure uniformity. Concentric with the motor shaft. Then tighten the screws.How to Adjust1. Put the product back into the grinding chamber, adjust the screw, turn it counterclockwise, then cover the front cover and lock it.2. Start the motor and tighten the adjusting screw clockwise until the product rubs a sharp sound. Turn off the switch after the motor idles for two minutes.3. Open the front cover, take out the product, observe the friction marks of the moving of the product and the static grinding piece tooth groove, and touch the product around the hand. If the friction marks on it are evenly distributed, and the heat difference is not obvious, it means that the product is installed in balance and can be used directly without adjustment.Specification Material: Fine Cast SteelColor: GreyNumber of Items: 2Applicable Grinding Machine Model: 150 ModelPurpose: Dry GrindingEach Inner Diameter: 77mm/3.03inCenter Distance: 98mm/3.86inEach Product Diameter: 147mm/ 5.79 inEdge Thickness: 8mm/ 0.32 inPackage Size: 26x17x4cm/10.24x6.69x1.57inGross Weight: 0.93kg/2.05lbsNet Weight: 0.6kg/1.32lbsPackage Included2 x Grinding DiscsNotes1. Please do not apply too much force, the three screws should be evenly and gradually tightened.2. Model 150 grinder discs also can be used for other commercial electric feed mill dry grinders, please measure the dimensions before ordering.3. This product cannot be used for water grinding or grinding materials with high moisture, oil, or viscosity, as well as herbs.

• ➤【Premium Material】This product is made of premium fine cast steel, which has undergone a series of treatments to resist corrosion and wear, is not easy to deform, or age, and has a long service life.
• ➤【Stable Fixation】The design of the three-hole installation hole can firmly fix this product inside the machine, improving the safety of use.
• ➤【Strong Load Capacity】With a thickness of 8mm, it can withstand the high-speed operation of the grinding machine and the impact of harder particles, resulting in less wear.
• ➤【2PCS A Set】This set includes two grinding discs, which you can purchase at once without the need for repeat orders.
• ➤【Wide Adaptability】The precise size of this product is suitable for the 150-model grinding machine, and you can easily replace your grinding discs.